Mazda 3 2020 User Manual

Introduction
▼
Introduction
Be careful not to hurt yourself when
inspecting your vehicle, replacing a
tyre, or doing some kind of
maintenance such as car washing.
In particular, wear thick work gloves
such as cotton gloves when touching
areas that are
dicult
to see while
inspecting or working on your vehicle.
Doing inspections or procedures with
your bare hands could cause injury.
If you are unsure about any procedure
this manual describes, we strongly urge
you to have a reliable and
qualified
technician perform the work, we
recommend an expert repairer (we
recommend an Authorised Mazda
Repairer).
Authorised Mazda technicians and
genuine Mazda parts are dedicated to
your vehicle. Without this expertise
and the parts that have been designed
and made especially for your Mazda,
inadequate, incomplete, and
insucient
servicing may result in
problems. This could lead to vehicle
damage or an accident and injuries.
For expert advice and quality service,
consult an Authorised Mazda Repairer.
The owner should retain evidence that
proper maintenance has been
performed as prescribed.
A claim against a warranty will not
qualify if it results from lack of
maintenance and not from defective
material or authorised workmanship.
The malfunction diagnosis connector is
designed exclusively for connecting the
specially designed device to perform
on-board diagnosis.
Do not connect any devices other than
the specially designed malfunction
diagnosis devices for servicing. If any
device other than the malfunction
diagnosis device is connected, it may
aect the vehicle's electrical devices or
lead to damage such as battery
depletion.
1. Malfunction diagnosis connector
Maintenance and Care
Essential Information
6-2
Mazda3_8HS5-EE19I_Edition1_new 2019-7-1 10:56:36

Mazda 3 2020 Specifications

General

Brand	Mazda
Model	3 2020
Category	Automobile
Language	English