Mazda 3 2020 - Switches and Controls; Lighting Control

Lighting Control
▼
Headlights
Turn the headlight switch to turn the headlights and other exterior lights on or o.
When the tail lights, position lights, and the number plate lights are turned on, the
lights-on indicator light in the instrument cluster turns on.
NOTE

To prevent discharging the battery, do not leave the lights on while the engine is
o unless safety requires them.

Headlights do not blind drivers approaching in the opposite direction no matter
what side of the road you must drive your vehicle (left-hand or right-hand trac).
Therefore, it is not necessary to adjust the optical axis of the headlights when
switching temporarily to driving on the opposite side of the road (left-hand or
right-hand trac).
Without auto-light control
Switch Position OFF
Headlights O O On
Running lights
*
On
*1
On
*1*2
O
Tail lights
Position lights
Number plate lights
O On On
*
1 When the light switch is switched to a
dierent
position from the OFF, position while the
vehicle is stopped, the running lights turn o. When starting to drive the vehicle, the running lights
turn on again.
When Driving
Switches and Controls
*Some models.
4-59
Mazda3_8HS5-EE19I_Edition1_new 2019-7-1 10:56:36