▼
Manual Switching
Switching to low beams
Switch the headlight switch to the
position, or press the ALH switch.
The ALH indicator light (green) turns
o.
1. ALH switch
If the ALH is turned o using the ALH
switch, press the ALH switch again to
turn the ALH back on.
Switching to high beams
Shift the lever to the high beam
position.
The ALH indicator light (green) turns
o and the headlight high-beam
indicator light is illuminated.
Lane Departure Warning
System (LDWS)
*
▼
Lane Departure Warning System
(LDWS)
The LDWS alerts the driver that the
vehicle may be deviating from its lane.
The system detects the white (yellow)
lines on the trac lane using the
forward sensing camera (FSC) and if it
determines that the vehicle might be
deviating from its lane, it
notifies
the
driver by the LDWS.
Refer to Forward Sensing Camera
(FSC) on page 4-229.
Use the LDWS when you drive the
vehicle on roads with white (yellow)
lines.
1. Forward sensing camera (FSC)
2. Multi-information display
When Driving
i-ACTIVSENSE
4-110
*Some models.
Mazda3_8HS5-EE19I_Edition1_new 2019-7-1 10:56:36