Mazda 3 2020 - Shift-Lock System

Shift-Lock System
▼
Shift-Lock System
The shift-lock system prevents shifting
out of P unless the brake pedal is
depressed.
To shift from
P
1. Depress and hold the brake pedal.
2. Start the engine.
3. Press and hold the lock-release
button.
4. Move the selector lever.
NOTE

When the ignition is switched to
ACC or the ignition is switched
o,
the selector lever cannot be shifted
from P position.

The ignition cannot be switched to
OFF if the selector lever is not in P
position.
▼
Shift-Lock Override
If the selector lever will not move from
P position using the proper shift
procedure, continue to hold down the
brake pedal.
Type A
1. Remove the shift-lock override
cover using a cloth-wrapped
flat
head screwdriver.
2. Insert a flat screwdriver and push it
down.
1. Cover
3. Press and hold the lock-release
button.
4. Move the selector lever.
Take the vehicle to an expert repairer
(we recommend an Authorised Mazda
Repairer) to have the system checked.
Type B
1. Press the lock-release button with
the button pressed.
1. Button
2. Move the selector lever.
Take the vehicle to an expert repairer
(we recommend an Authorised Mazda
Repairer) to have the system checked.
When Driving
Automatic Transmission
4-49
Mazda3_8HS5-EE19I_Edition1_new 2019-7-1 10:56:36