Mazda 3 2020 - Message Indicated on Multi-information Display

Message Indicated on Multi-information Display
▼
Message Indicated on Multi-information Display
If there is a notification from the vehicle, a message is displayed on the
multi-information display. Check the information and take the necessary action.
1. Multi-information display
If the warning light turns on/flashes simultaneously or a symbol is indicated on the
display, check the information regarding the warning light or symbol.
Refer to If a Warning Light Turns On or Flashes on page 7-54.
Display
*1*2
Content Action to be taken
Depress Brake Pedal.
Brake Hold Disabled
This message is indicated when there
is a problem with the brake related
system while the vehicle is being held
in a stop position by the AUTOHOLD
function.
Depress the brake pedal. Cancel the
AUTOHOLD function and have your
vehicle inspected at an expert repair-
er (we recommend an Authorised
Mazda Repairer).
Steep Slope. Continue
Pressing Brake Pedal to
Hold Stopped Position
This message indicates the possibility
of the vehicle not being held in the
stopped position by the AUTOHOLD
function, such as on steep slopes.
Depress and hold your foot on the
brake pedal.
Depress Brake Pedal and
Operate Switch to Re-
lease EPB
This message is indicated when the
Electric Parking Brake (EPB) switch is
operated without depressing the
brake pedal.
Operate the Electric Parking Brake
(EPB) switch while depressing the
brake pedal.
Depress Brake Pedal and
Operate Switch to Re-
lease
This message is indicated when the
cancel operation is done without de-
pressing the brake pedal while the
vehicle is being held in the stopped
position by the AUTOHOLD function.
Cancel the AUTOHOLD function stop
hold control while depressing the
brake pedal.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-69
Mazda3_8HS5-EE19I_Edition1_new 2019-7-1 10:56:36