Mazda 3 2020 - Turn and Lane-Change Signals

Turn and Lane-Change
Signals
▼
Turn and Lane-Change Signals
The ignition must be switched ON to
use the turn and lane-change signals.
▼
Direction Indicators
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel
after the turn is completed.
If the indicator light continues to flash
after a turn, manually return the lever
to its original position.
1. Right turn
2. Right lane change
3. OFF
4. Left lane change
5. Left turn
The direction indicators in the
instrument cluster flash according to
the operation of the direction indicator
lever to show which signal is working.
NOTE

There may be a problem with the
direction indicator lights if they do
not flash but remain turned on, or
they flash abnormally. Have your
vehicle inspected by an expert
repairer (we recommend an
Authorised Mazda Repairer).

A personalised function is available
to change the turn indicator sound
volume.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
When Driving
Switches and Controls
4-65
Mazda3_8HS5-EE19I_Edition1_new 2019-7-1 10:56:36