Mazda 3 2020 - Page 188

NOTE

When the illumination dimmer is
cancelled, the instrument cluster
cannot be dimmed even if the lights
are turned on.

When the illumination dimmer is
cancelled, the screen in the centre
display switches to constant display
of the daytime screen.
▼
Outside Temperature Display
When the ignition is switched ON, the
outside temperature is displayed.
NOTE

Under the following conditions, the
outside temperature display may
dier
from the actual outside
temperature depending on the
surroundings and vehicle conditions:

Significantly cold or hot
temperatures.

Sudden changes in outside
temperature.

The vehicle is parked.

The vehicle is driven at low speeds.
Changing the Temperature Unit of the
Outside Temperature Display
The outside temperature unit can be
switched between Celsius and
Fahrenheit.
Settings can be changed by operating
the centre display screen.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
NOTE
When the temperature unit indicated
in the outside temperature display is
changed, the temperature unit
indicated in the engine coolant gauge
display changes in conjunction with it.
Outside Temperature Warning
*
When the outside temperature is low,
the indication flashes and a beep
sound is heard to warn the driver of
the possibility of icy roads.
If the outside temperature is lower
than about 4 °C (39 °F), the outside
temperature display and the
mark
flashes for about 3 seconds and a beep
sound is heard once.
NOTE
If the outside temperature is lower
than -20 °C (-4 °F), the beep sound
does not operate. However, the
mark illuminates.
When Driving
Instrument Cluster and Display
4-30
*Some models.
Mazda3_8HS5-EE19I_Edition1_new 2019-7-1 10:56:36