Mazda 3 2020 - Page 283


Visual + Audible: The area around the speed limit sign displayed in the display
flashes in amber and the warning sound is activated at the same time. If the
vehicle speed continues to exceed the displayed speed limit sign, the indication
stops flashing and remains on. The warning sound is activated continuously until
the vehicle speed decreases below the speed limit sign.
Speed Limit Sign Threshold setting

+ 0: If the vehicle speed exceeds the speed limit sign displayed in the display, the
excessive speed warning is activated.

+ 5: If the vehicle speed exceeds the speed limit sign displayed in the display by 5
km/h (3 mph), the excessive speed warning is activated.

+ 10: If the vehicle speed exceeds the speed limit sign displayed in the display by
10 km/h (5 mph), the excessive speed warning is activated.
NOTE

In the following cases, the excessive speed warning stops operating.

The vehicle speed is less than the speed of the displayed speed limit sign. (If the
activation timing for the excessive speed warning is changed in the
personalisation features, the excessive speed warning stops operating when the
vehicle speed is less than the changed vehicle speed.

A speed limit sign indication has been updated and the vehicle speed is lower
than the updated indication.

Display of the speed limit sign stops.

The warning indication is displayed at the same time the excessive speed warning
sound is activated if the vehicle speed exceeds the speed indicated on the speed
limit sign.
Refer to Excessive Speed Warning on page 7-78.

If the Forward Sensing Camera (FSC) or data recorded in the navigation system
incorrectly recognises the actual speed limit sign at a lower speed, the excessive
speed alarm is activated even if the vehicle is driven at the legal speed.
When Driving
i-ACTIVSENSE
4-125
Mazda3_8HS5-EE19I_Edition1_new 2019-7-1 10:56:36