Mazda 3 2020 - Page 327

In the following cases, the CTS cancel indication is displayed and a sound is
activated one time.

The DSC has operated.

The Smart Brake Support (SBS) has operated.

The vehicle is driven on a downslope for a long time.

There is a problem with the system.

The front radar sensor cannot detect target objects (during rain, fog, snow or other
inclement weather conditions, or when the radiator grille is dirty).

The parking brake is applied.

Any of the doors is opened.

The driver's seat belt is unfastened.

The operation frequency of the braking by the CTS control is high.

(Automatic transmission vehicle)
The parking brake is automatically applied during stop hold control.

(Manual transmission vehicle)

The vehicle speed decreases below 25 km/h (15 mph).

The shift lever is in the neutral position for a certain period of time.

The clutch pedal is depressed for a certain period of time.

The engine has stalled.
Steering assist function
If any of the following conditions occurs, the steering assist function is temporarily
cancelled.

The headway control function is cancelled.

White (yellow) lane lines cannot be detected or a vehicle ahead cannot be
recognised.

Your vehicle speed is more than about 60 km/h (37 mph).

The accelerator pedal is operated.

The direction indicator lever is operated.

The vehicle is being driven on a sharp curve.

The width of a lane is excessively narrow or wide.

The vehicle crosses a lane line.
When Driving
i-ACTIVSENSE
4-169
Mazda3_8HS5-EE19I_Edition1_new 2019-7-1 10:56:36