When replacing tyres and wheels
CAUTION
When replacing the tyres and
wheels, consult an expert repairer
(we recommend an Authorised
Mazda Repairer) Otherwise, the tyre
pressure sensors could be damaged
when replacing them.
Do not install non-genuine wheels. If
wheels other than genuine ones are
installed, it may not be possible to
install the tyre pressure sensors.
When replacing a tyre or wheel, always
install the tyre pressure sensor. The
following combinations of tyres,
wheels, or tyres and wheels are
possible.
The tyre pressure sensor from the old
wheel is removed and it is installed
to the new wheel.
Only a tyre is replaced without
replacing the tyre pressure sensor
and wheel.
A new tyre pressure sensor is
installed to a new wheel.
NOTE
When installing a new tyre pressure
sensor, the ID signal code for the tyre
pressure sensor needs to be registered.
For details on purchasing a tyre
pressure sensor and registering the ID
signal of the tyre pressure sensor,
consult an expert repairer (we
recommend an Authorised Mazda
Repairer).
When Driving
Tyre Pressure Monitoring System (TPMS)
4-248
Mazda3_8HS5-EE19I_Edition1_new 2019-7-1 10:56:36
To Next Page
Loading...
