▼
Except Europe
Israel
Vehicles utilizing the vehicle status monitor feature:
The vehicle status monitor feature alerts you of maintenance needs by turning on the
wrench indicator light or displaying a message in the instrument panel, or both.
Every maintenance must be done when the display/wrench indication comes on.
The display/wrench indication will come on before reaching the maximum interval.
Maximum interval 15,000 km or 12 months, whichever comes first
Manually set Next Service Distance of Vehicle Status Monitor to 10,000 km or short-
er if the vehicle is driven primarily under any of the following conditions:
Refer to the Information section in the Mazda Connect Owner's Manual about the
manual setting procedure.
1. The vehicle is idled for long periods or driven at low speeds, such as with police
cars, taxis, or driver's education school car.
2. Driving under dusty conditions.
3. Driving for long periods in cold temperatures or driving regularly for short distan-
ces only.
4. Driving under extremely high temperature conditions.
5. Driving continuously in mountainous regions.
Maintenance Item 1st
2nd
3rd 4th 5th 6th 7th 8th 9th
10th 11th 12th
Engine oil & oil
filter
*1
RRRRRRRRRRRR
Drive belts
*2
IIIIIIIIIIII
Engine coolant level IIIIIIIIIIII
Battery
*3*4
IIIIIIIIIIII
Vacuum brake booster and
hose
With vacuum
booster
IIIIIIIIIIII
Brake and clutch fluid level IIIIIIIIIIII
Brake lines, hoses and connections IIIIIIIIIIII
Disc brakes IIIIIIIIIIII
Bolts and nuts on chassis and body T T T T T T T T T T T T
Front and rear suspension, ball joints and
wheel bearing axial play
IIIIIIIIIIII
Body condition (for rust, corrosion and per-
foration)
IIIIIIIIIIII
Tyre inflation pressure and tyre wear
*5*6
IIIIIIIIIIII
Emergency flat tyre repair kit (if installed)
*7
IIIIIIIIIIII
Fuel lines and hoses IIIIII
Maintenance and Care
Scheduled Maintenance
6-7
Mazda3_8HS5-EE19I_Edition1_new 2019-7-1 10:56:36
To Next Page
Loading...
