▼
Removing a Flat Tyre
WARNING
When jacking-up a vehicle, always
shift the shift lever to 1st or R position
(manual transmission vehicle) or shift
the selector lever to P position
(automatic transmission vehicle),
apply the parking brake, and place
wheel blocks in the position
diagonally opposed to the jack:
Changing a flat tyre without using
wheel blocks is dangerous because the
vehicle may move and fall o the jack
even with the shift lever in 1st or R
position, or the selector lever is in P
position, which could result in an
accident.
1. If your vehicle is equipped with a
wheel cover, pry
o
the wheel
cover with the bevelled end of the
jack lever.
NOTE
Force the end of the jack lever
firmly between wheel and cover, or
removal will be
dicult.
CAUTION
Align the notch on the wheel cover
with the valve stem when installing
it.
1. Notch
2. Tyre valve
Damage could occur during
installation if the wheel cover is not
properly aligned.
If Trouble Arises
Flat Tyre
7-38
Mazda3_8HS5-EE19I_Edition1_new 2019-7-1 10:56:36
To Next Page
Loading...
