Mazda 3 2020 - Page 707

Tyre and inflation pressure
NOTE
The tyres have been optimally matched with the chassis of your vehicle.
When replacing tyres, Mazda recommends that you replace tyres of the same type
originally fitted to your vehicle. For details, contact an expert repairer (we
recommend an Authorised Mazda Repairer).
Check the tyre pressure label for tyre size and
inflation
pressure.

Refer to Tyre Inflation Pressure on page 6-43.

Refer to Tyre Pressure Label on page 9-3.
Standard tyre
Tyre size
Inflation pressure
Up to 3 persons ―Full load
205/60R16 92V
Type A
*1
Front 250 kPa (2.5 bar, 36 psi) 260 kPa (2.6 bar, 38 psi)
Rear 250 kPa (2.5 bar, 36 psi) 290 kPa (2.9 bar, 42 psi)
Type B
*1
Front 260 kPa (2.6 bar, 38 psi) 260 kPa (2.6 bar, 38 psi)
Rear 250 kPa (2.5 bar, 36 psi) 290 kPa (2.9 bar, 42 psi)
215/45R18 89W
Type A
*1
Front 250 kPa (2.5 bar, 36 psi) 270 kPa (2.7 bar, 39 psi)
Rear 250 kPa (2.5 bar, 36 psi) 290 kPa (2.9 bar, 42 psi)
Type B
*1
Front 260 kPa (2.6 bar, 38 psi) 270 kPa (2.7 bar, 39 psi)
Rear 250 kPa (2.5 bar, 36 psi) 290 kPa (2.9 bar, 42 psi)
1 person's weight: About 75 kg
*
1 Check the tyre inflation pressure label (driver's door frame ) for the correct tyre inflation pressure.
Refer to Tyre Pressure Label on page 9-3.
Temporary spare tyre
*
Tyre size Inflation pressure
T125/70D16 96M 420 kPa (4.2 bar, 60 psi)
T125/80D16 97M 420 kPa (4.2 bar, 60 psi)
185/55R16 87M 320 kPa (3.2 bar, 46 psi)
Specifications
Specifications
*Some models.
9-13
Mazda3_8HS5-EE19I_Edition1_new 2019-7-1 10:56:36