▼
Transmitter
1. Operation indicator light
2. Lock button (
)
3. Unlock button (
)
4. Boot button (Saloon) (
or )
5. Intrusion sensor cancel button (
)
*
NOTE
The headlights turn
on/o
by
operating the transmitter. Refer to
Leaving Home Light on page 4-63.
(With theft-deterrent system)
The hazard warning lights
flash
when
the theft-deterrent system is armed
or turned o.
Refer to Theft-Deterrent System on
page 3-49.
(With the advanced keyless function
(European models))
The setting can be changed so that a
beep sound is heard for
confirmation
when the doors, liftgate/boot lid
*1
,
and fuel-filler flap are locked/
unlocked using the key.
(With the advanced keyless function
(Except European models))
A beep sound can be heard for
confirmation when the doors,
liftgate/boot lid
*1
, and
fuel-filler
flap
are locked/unlocked using the key. If
you prefer, the beep sound can be
turned
o.
The volume of the beep sound can
also be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
The operation indicator light
flashes
when the buttons are pressed.
Lock button
To lock the doors, liftgate/boot lid
*1
,
and fuel-filler flap, press the lock
button and the hazard warning lights
will
flash
once.
(With the advanced keyless function
(Except European models))
A beep sound will be heard once.
NOTE
If the lock button is pressed with any
door or liftgate/boot lid open, any
closed door can be locked. Close
any open door and liftgate/boot lid
to lock.
Make sure all the doors, liftgate/
boot lid
*1
, and fuel-filler flap are
locked after pressing the button.
(With double locking system)
Pressing the lock button twice within
3 seconds will activate the double
locking system.
Refer to Double Locking System on
page 3-14.
(With theft-deterrent system)
If the lock button is pressed with all
the doors and liftgate closed, the
hazard warning lights will flash and
the theft-deterrent system is armed.
Before Driving
Keys
*Some models.
3-5
Mazda3_8HS5-EE19I_Edition1_new 2019-7-1 10:56:36
To Next Page
Loading...
