Mazda 3 - Page 347

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Downloaded from https://carmanualshub.com/ - automotive repair manuals website
347
Diagnostic procedure
STEP
INSPECTION
ACTION
1
VERIFY FREEZE FRAME DATA HAS
BEEN RECORDED
• Has FREEZE FRAME DATA been
recorded?
Yes
Go to the next step.
No
Record the FREEZE FRAME DATA on the
repair order, then go to the next step.
2
VERIFY RELATED REPAIR
INFORMATION AVAILABILITY
• Verify related service repair information
availability.
• Is any related repair information
available?
Yes
Perform repair or diagnosis according to the
available repair information.
• If the vehicle is not repaired, go to the next
step.
No
Go to the next step.
3
INSPECT POOR CONNECTION OF EGR
VALVE
• Turn the ignition switch off.
• Disconnect EGR valve connector.
• Inspect for poor connection (such as
damaged/pulled-out pins, corrosion).
• Is there any malfunction?
Yes
Repair or replace the terminals and/or
connector, then go to Step 10.
No
Go to the next step.