Mazda 3 - Variable Tumble Shutter Valve Actuator Removal Note; Retainer Removal Note; Retainer Installation Note

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Downloaded from https://carmanualshub.com/ - automotive repair manuals website
784
1
Variable tumble shutter valve actuator
(See Variable Tumble Shutter Valve Actuator Removal Note)
(See Variable Tumble Shutter Valve Actuator Installation Note)
2
Retainer
(See Retainer Removal Note)
(See Retainer Installation Note)
4. Install in the reverse order of removal.
Variable Tumble Shutter Valve Actuator Removal Note
1. After removing the actuator, cover it with a plastic sheet to prevent foreign material from entering the
inside of the actuator.
Retainer Removal Note
1. After removing the retainer, cover it with a plastic sheet to prevent foreign material from contacting the
intake manifold side gear.
Retainer Installation Note
1. Install the retainer by positioning the projection on the intake manifold with the indentation on the
retainer.
2. Be careful not to shift the retainer installation position.