Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Downloaded from https://carmanualshub.com/ - automotive repair manuals website
(2) Pull the vacuum tube from the intake manifold.
5. Install in the reverse order of removal.
Evaporative Hose Installation Note
1. Install the evaporative hose and clamp as shown in the figure.
PURGE SOLENOID VALVE REMOVAL/INSTALLATION
[Z6]
B3E011618740W02
1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [Z6].)
2. Disconnect the negative battery cable.
To Next Page
Loading...
