Mazda 3 - Page 49

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Downloaded from https://carmanualshub.com/ - automotive repair manuals website
49
• Turn the ignition switch to the ON
position (Engine off).
• Clear the DTC from the PCM memory
using WDS or equivalent.
• Start the engine.
• Access RPM PID using the WDS or
equivalent.
• Warm up the engine completely.
• Turn off all electrical roads.
• Increase and keep the engine
speed 2,500 rpm or more for 10 s.
• Is the PENDING CODE for this DTC
present?
8
VERIFY AFTER REPAIR
PROCEDURE
• Perform "AFTER REPAIR
PROCEDURE".
(See AFTER REPAIR PROCEDURE
[Z6].)
• Are any DTCs present?
Yes
Go to the applicable DTC troubleshooting.
(See DTC TABLE [Z6].)
No
Troubleshooting completed.