Mazda 3 - Page 653

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Downloaded from https://carmanualshub.com/ - automotive repair manuals website
653
Caution
• Install the engine front cover within 10 min of applying the silicone sealant.
Thickness
2-4 mm {0.08-0.15 in)
2. Tighten the engine front cover installation bolts in the order shown in the figure.
• Install a No.1 bolt using a new seal washer.
Bolt number
Tightening torque
1-6, 8, 10,
12-15, 17, 18
18.6-25.5 N·m
{1.90-2.29kgf·m, 13.8-16.5 ft·lbf}
7, 11, 16
37.2-51.9 N·m
{3.80-5.29 kgf·m, 27.5-38.2 ft·lbf}
9
7.8-10.8 N·m
{80-110 kgf·cm, 69.1-95.5 in·lbf}
3. Apply clean engine oil to the new front oil seal.