Mazda 3 - Page 67

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Downloaded from https://carmanualshub.com/ - automotive repair manuals website
67
• Make sure to reconnect all disconnected
connectors.
• Clear the DTC from the PCM memory
using the WDS or equivalent.
• Start the engine.
• Is the same DTC present?
No
Go to the next step.
9
VERIFY AFTER REPAIR PROCEDURE
• Perform the "AFTER REPAIR
PROCEDURE".
(See AFTER REPAIR PROCEDURE [Z6].)
• Are any DTCs present?
Yes
Go to the applicable DTC inspection.
(See DTC TABLE [Z6].)
No
DTC troubleshooting completed.