Mazda 3 - Page 74

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Downloaded from https://carmanualshub.com/ - automotive repair manuals website
74
• Is there any malfunction?
7
VERIFY TROUBLESHOOTING OF
DTC P0111 COMPLETED
• Make sure to reconnect all
disconnected connectors.
• Clear the DTC from the PCM
memory using the WDS or equivalent.
• Start the engine and warm it up
completely.
• Is the PENDING CODE for this DTC
present?
Yes
Replace the PCM, then go to the next step.
(See PCM REMOVAL/INSTALLATION [Z6].)
No
Go to the next step.
8
VERIFY AFTER REPAIR
PROCEDURE
• Perform the "AFTER REPAIR
PROCEDURE".
(See AFTER REPAIR PROCEDURE
[Z6].)
• Are any DTCs present?
Yes
Go to the applicable DTC inspection.
(See DTC TABLE [Z6].)
No
DTC troubleshooting completed.