Mazda 3 - Page 92

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
Downloaded from https://carmanualshub.com/ - automotive repair manuals website
92
• Open circuit in wiring harness between TP sensor terminal A and PCM
terminal 2W
• Short to GND in wiring harness between TP sensor terminal A and PCM
terminal 2W
• Open circuit in wiring harness between TP sensor terminal C and PCM
terminal 2AA
• Short to GND in wiring harness between TP sensor terminal C and PCM
terminal 2AA
• PCM malfunction
Diagnostic procedure
STEP
INSPECTION
ACTION
1
VERIFY FREEZE FRAME DATA HAS
BEEN RECORDED
• Has FREEZE FRAME DATA been
recorded?
Yes
Go to the next step.
No
Record the FREEZE FRAME DATA on the
repair order, then go to the next step.
2
VERIFY RELATED REPAIR INFORMATION
AVAILABILITY
• Verify related service repair information
availability.
Yes
Perform repair or diagnosis according to the
available repair information.
• If the vehicle is not repaired, go to the next
step.