Mazda CX-3 - Page 213

▼
Outside Temperature Display
When the ignition is switched ON, the
outside temperature is displayed.
NOTE
x
Under the following conditions, the
outside temperature display may differ
from the actual outside temperature
depending on the surroundings and
vehicle conditions:
x
Significantly cold or hot temperatures.
x
Sudden changes in outside
temperature.
x
The vehicle is parked.
x
The vehicle is driven at low speeds.
Changing the Temperature Unit of the
Outside Temperature Display (Vehicles
with Type B audio)
The outside temperature unit can be
switched between Celsius and Fahrenheit.
Settings can be changed by operating the
centre display screen.
Refer to Personalisation Features on page
9-13.
NOTE
When the temperature unit indicated in the
outside temperature display is changed,
the temperature unit indicated in the
engine coolant gauge display changes in
conjunction with it.
Outside Temperature Warning
*
When the outside temperature is low, the
indication flashes and a beep sound is
heard to warn the driver of the possibility
of icy roads.
If the outside temperature is lower than
about 4 °C (39 °F), the outside
temperature display and the
mark
flashes for about ten seconds and a beep
sound is heard once.
NOTE
If the outside temperature is lower
than -20 °C (-4 °F), the beep sound does
not operate. However, the
mark
illuminates.
▼
Cruise Control Set Vehicle Speed
Display
*
The vehicle speed preset using the cruise
control is displayed.
▼
Adjustable Speed Limiter (ASL)
Display
*
The setting status of the adjustable speed
limiter (ASL) is displayed.
When Driving
Instrument Cluster and Display
4-28
*Some models.
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52