Mazda CX-3 - High Beam Control System (HBC)

High Beam Control System (HBC)
*
The HBC determines the conditions in front of the vehicle using the Forward Sensing
Camera (FSC) while driving in darkness to automatically switch the headlights between
high and low beams.
Refer to Forward Sensing Camera (FSC) on page 4-213.
While driving the vehicle at a speed of about 30 km/h (19 mph) or more, the headlights are
switched to high beams when there are no vehicles ahead or approaching in the opposite
direction.
The system switches the headlights to low beams when one of the following occurs:
x
The system detects a vehicle or the headlights/lights of a vehicle approaching in the
opposite direction.
x
The vehicle is driven on roads lined with streetlamps or on roads in well-lit cities and
towns.
x
The vehicle is driven at less than about 20 km/h (12 mph).
Forward Sensing
Camera (FSC)
The recognition distance of the
Forward Sensing Camera (FSC)
varies according to the
surrounding conditions.
The warning light turns on when the system has a malfunction.
Refer to Contact Authorised Mazda Repairer and Have Vehicle Inspected on page 7-36.
CAUTION
¾Do not adjust the vehicle height, modify the headlight units, or remove the camera,
otherwise the system will not operate normally.
¾Do not rely excessively on the HBC and drive the vehicle while paying sucient attention to
safety. Switch the headlights between the high beams and low beams manually if
necessary.
When Driving
i-ACTIVSENSE
4-110
*Some models.
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52