▼
Manual Switching
Switching to low beams
Shift the lever to the low beam position.
The HBC indicator light (green) turns off.
Switching to high beams
Turn the headlight switch to the
position.
The HBC indicator light (green) turns off
and the
is illuminated.
Adaptive LED Headlights
(ALH)
*
The ALH are a system which uses the
Forward Sensing Camera (FSC) to
determine the situation of a vehicle ahead
or a vehicle approaching in the opposite
direction while driving at night to
automatically switch the illumination
range of the headlights, the illuminated
area, or the illumination brightness.
Refer to Forward Sensing Camera (FSC)
on page 4-213.
The ALH are controlled between high and
low beams as follows to assure the driver’s
visibility without dazzling a vehicle ahead
or a vehicle approaching in the opposite
direction.
Glare-Free High Beam
This feature dims only the high-beam light
shone on the vehicle ahead.
The high beams will dim while driving at
a speed of about 40 km/h (25 mph) or
faster. When the vehicle speed is less than
about 30 km/h (18 mph), the beams switch
to the low beams.
NOTE
The headlight high-beam indicator light
turns on while the high beams are on.
When Driving
i-ACTIVSENSE
4-112
*Some models.
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52
To Next Page
Loading...
