Adjustable Speed Limiter (ASL)
*
The ASL is a function to prevent the vehicle from being driven at a vehicle speed faster than
a set speed. The vehicle speed is controlled to kept it below the set speed even if the
accelerator pedal is depressed.
The ASL can be set between 30 km/h (20 mph) and 200 km/h (125 mph). The vehicle speed
may exceed the set speed when the vehicle is driven on a down slope, however, the system
notifies the driver by flashing the display and operating a warning sound.
WARNING
Always turn
o
the system when changing drivers:
If the driver is changed and the new driver is unaware of the ASL function, the vehicle may not
accelerate when the driver depresses the accelerator pedal, leading to an accident.
The system consists of the ASL display and the speed limiter switch on the steering wheel.
Active Driving Display Display in the instrument cluster
CANCEL switch
OFF switch
Cruise control system
MODE switch
RES/+ switch
SET/- switch
OFF/CANCEL switch
RES switch
MODE
switch
SET- switch
SET+ switch
Mazda Radar Cruise Control (MRCC) or
Mazda Radar Cruise Control with Stop & Go
function (MRCC with Stop & Go function)
When Driving
i-ACTIVSENSE
*Some models.
4-165
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52