Mazda CX-3 - Active Driving Display

Active Driving Display
*
Optical receiver
Mirror
Combiner
WARNING
Always adjust the display brightness and position with the vehicle stopped:
Adjusting the display brightness and position while driving the vehicle is dangerous as doing
so could distract your attention from the road ahead and lead to an accident.
CAUTION
¾Do not try to adjust the angle or open/close the active driving display manually.
Fingerprints on the display will make it
dicult
to view and using excessive force when
operating it could cause damage.
¾Do not place objects in the vicinity of the active driving display. The active driving display
may not operate or any interference with its operation could cause damage.
¾Do not place beverages near the active driving display. If water or other liquids are splashed
on the active driving display, it could cause damage.
¾Do not place objects above the active driving display or apply stickers to the dust-proof
sheet/optical receiver as they will cause interference.
¾A sensor is integrated to control the display's luminosity. If the optical receiver is covered,
the display's luminosity will lower making the display
dicult
to view.
¾Do not allow intense light to hit the optical receiver. Otherwise, it could cause damage.
NOTE
x
Weari ng po larized s ungla sses will reduce th e visibility of the active driving display due to
the characteristics of the display.
x
If the battery has been removed and re-installed or the battery voltage is low, the adjusted
position may deviate.
When Driving
Instrument Cluster and Display
4-32
*Some models.
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52