Electromagnetic Compatibility
You r M azda has bee n te sted an d ce rtifi ed t o th e UN-R
*1
10 regulation as related to
electromagnetic compatibility. Radio Frequency (RF) transmitter equipment (e.g. cellular
telephones, amateur radio transmitters, etc.) may only be fitted to your Mazda if they
comply with the parameters shown in the table below.
*
1UN-R stands for United Nations Regulation.
It is your responsibility to ensure that any equipment you have fitted complies with
applicable local legislations. Have any equipment fitted by properly trained technicians.
CAUTION
¾Do not mount any transceiver, microphones, speakers, or any other item in the deployment
path of the air bag system.
¾Do not fasten aerial lead to original vehicle wiring, fuel pipes or brake pipes. Avoid running
the aerial lead parallel with the wire harness to the best extent possible.
¾Keep the aerial and power leads at least 100 mm (3.9 in) from any electronic modules and
the air bags.
¾Avoid using the cigar lighter or accessory socket as a power source for the RF-transmitting
equipment.
Aerial positions:
: front right of roof
: front left of roof
: centre of roof
: both sides of liftgate
Frequency Band (MHz) Maximum output power (Wattage) Aerial Positions
50 ― 54 50
68 ― 87.5 50
142 ― 176 50
380 ― 470 50
806 ― 940 10
1200 ― 1300 10
1710 ― 1885 10
Customer Information
Electromagnetic Compatibility
8-32
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52
To Next Page
Loading...
