Mazda CX-3 - Accessory Socket

Accessory Socket
Only use genuine Mazda accessories or
the equivalent requiring no greater than
120 W (DC 12 V, 10 A).
The ignition must be switched to ACC or
ON.
Type A
Type B
CAUTION
¾To prevent accessory socket damage or
electrical failure, pay attention to the
following:
¾Do not use accessories that require
more than 120 W (DC 12 V, 10 A).
¾Do not use accessories that are not
genuine Mazda accessories or the
equivalent.
¾Close the cover when the accessory
socket is not in use to prevent foreign
objects and liquids from getting into
the accessory socket.
¾Correctly insert the plug into the
accessory socket.
¾Do not insert the cigarette lighter into
the accessory socket.
¾Noise may occur on the audio playback
depending on the device connected to
the accessory socket.
¾Depending on the device connected to
the accessory socket, the vehicle's
electrical system may be aected, which
could cause the warning light to
illuminate. Disconnect the connected
device and make sure that the problem is
resolved. If the problem is resolved,
disconnect the device from the socket
and switch the ignition
o.
If the problem
is not resolved, consult an expert repairer
(we recommend an Authorised Mazda
Repairer).
NOTE
To prevent dis chargin g o f the bat tery, do
not use the socket for long periods with the
engine off or idling.
Interior Features
Interior Equipment
5-148
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52