NOTE
x
If shifting to R is difficult, shift back into
neutral, release the clutch pedal, and try
again.
x
(With i-stop function)
If the engine has stopped due to stalling,
it can be restarted by depressing the
clutch pedal within 3 seconds of the
engine stopping.
The engine cannot be restarted even if
the clutch pedal is depressed under the
following conditions:
x
The driver's door is open.
x
The driver's seat belt is unfastened.
x
The clutch pedal is not released
completely after the engine stalled.
x
The clutch pedal is depressed with the
engine not stopped completely.
x
(With parking sensor system)
When the shift lever is shifted to the R
position with the ignition switched ON,
the parking sensor system is activated
and a beep sound is heard.
Refer to Parking Sensor System on page
4-242.
▼
Gear Shift Indicator (GSI)
The GSI supports you to obtain optimum
fuel economy and smooth driving. It
displays the selected gear position in the
instrument cluster as well as notifies the
driver to change to the most suitable gear
position corresponding to the actual
driving condition.
Selected gear position Suitable gear position
Indication Condition
Numeral
The selected gear position is dis‐
played.
and numeral
Shift up or down to the indicated
gear position is recommended.
CAUTION
Do not rely solely on the shift-up/
shift-down recommendations by
indications. The actual driving situation
might require shift operations dierent
from indication. To avoid the risk of
accidents, the road and trac conditions
have to be judged correctly by the driver
before shifting.
NOTE
The GSI turns off when the following
operations are performed.
x
The vehicle is stopped.
x
The vehicle is put in neutral.
x
The vehicle is driven in reverse.
When Driving
Manual Transaxle Operation
4-45
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52
To Next Page
Loading...
