x
Some problem with the system including the Blind Spot Monitoring (BSM) warning
indicator lights has occurred.
x
A large deviation in the installation position of a radar sensor (rear) on the vehicle has
occurred.
x
There is a large accumulation of snow or ice on the rear bumper near a radar sensor
(rear).
x
Driving on snow-covered roads for long periods.
x
The temperature near the radar sensors becomes extremely hot due to driving for long
periods on slopes during the summer.
x
The battery voltage has decreased.
x
Under the following conditions, the radar sensors (rear) cannot detect target objects or it
may be difficult to detect them.
x
The vehicle speed when reversing is about 10 km/h (6.3 mph) or faster.
x
The radar sensor (rear) detection area is obstructed by a nearby wall or parked vehicle.
(Reverse the vehicle to a position where the radar sensor detection area is no longer
obstructed.)
Your vehicle
x
A vehicle is approaching directly from the rear of your vehicle.
Your vehicle
x
The vehicle is parked at an angle.
Your vehicle
x
(With Blind Spot Monitoring (BSM) OFF switch)
Directly after pressing the Blind Spot Monitoring (BSM) OFF switch and the system
becomes operable.
When Driving
i-ACTIVSENSE
4-139
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52
To Next Page
Loading...
