Mazda CX-3 - Page 328

▼
Mazda Radar Cruise Control (MRCC) Display Indication
The MRCC setting status and operation conditions are indicated on the active driving
display.
Vehicle ahead display
MRCC Distance
between vehicle
display
MRCC Set vehicle speed
If there is a problem with the MRCC system, MRCC warning light (amber) turns on. Check
the centre display to verify the problem and then have your vehicle inspected by an expert
repairer (we recommend an Authorised Mazda Repairer).
▼
Close Proximity Warning
If your vehicle rapidly closes in on the vehicle ahead because the vehicle ahead applies the
brakes suddenly while you are travelling in headway control, the warning sound activates
and the brake warning is indicated in the display. Always verify the safety of the
surrounding area and depress the brake pedal while keeping a safer distance from the
vehicle ahead. Additionally, keep a safer distance from the vehicles behind you.
NOTE
In the following cases, the warnings and brakes may not operate even if your vehicle starts
closing in on the vehicle ahead.
x
You are dr ivin g yo u r vehicl e at t he same spe ed a s t h e v ehic l e a h ead .
x
Directly after the MRCC system has been set.
x
Directly after the accelerator pedal is released.
x
Another vehicle cuts into the driving lane.
When Driving
i-ACTIVSENSE
4-143
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52