3. Install the wheel nuts with the bevelled
edge inward; tighten them by hand.
WARNING
Do not apply oil or grease to wheel nuts
and bolts and do not tighten the wheel
nuts beyond the recommended
tightening torque:
Applying oil or grease to wheel nuts
and bolts is dangerous. The wheel nuts
could loosen while driving and cause
the tyre to come o, resulting in an
accident. In addition, wheel nuts and
bolts could be damaged if tightened
more than necessary.
4. Turn the wheel brace anticlockwise
and lower the vehicle.
5. Use the wheel brace to tighten the nuts
in the order shown.
If you are unsure of how tight the nuts
should be, have them inspected at an
expert repairer (we recommend an
Authorised Mazda Repairer).
Nut tightening torque
Nꞏm (kgfꞏm, ftꞏlbf)
108―147 (12―14,
80―108)
WARNING
Always securely and correctly tighten
the wheel nuts:
Improperly or loosely tightened wheel
nuts are dangerous. The wheel could
wobble or come o. This could result in
loss of vehicle control and cause a
serious accident.
If Trouble Arises
Flat Tyre
7-20
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52
To Next Page
Loading...
