Mazda CX-3 - Page 763

Tyre and inflation pressure
NOTE
The tyres have been optimally matched with the chassis of your vehicle.
When replacing tyres, Mazda recommends that you replace tyres of the same type originally
fitted to your vehicle. For details, contact an expert repairer (we recommend an Authorised
Mazda Repairer).
Check the tyre pressure label for tyre size and inflation pressure (page 6-42).
After adjusting the tyre pressure, initialization of the tyre pressure monitoring system is
necessary to make the system operates normally.
Refer to Tyre Pressure Monitoring System Initialization on page 4-232.
Standard tyre
(SKYACTIV-G 2.0)
Tyre size
Inflation pressure
Up to 3 persons ―Full load
215/60R16 95V
Front 230 kPa (2.3 bar, 33 psi) 260 kPa (2.6 bar, 38 psi)
Rear
210 kPa (2.1 bar, 30 psi)
*1
/
230 kPa (2.3 bar, 33 psi)
*2
330 kPa (3.3 bar, 48 psi)
*1
/
350 kPa (3.5 bar, 51 psi)
*2
215/50R18 92V
Front 230 kPa (2.3 bar, 33 psi) 260 kPa (2.6 bar, 38 psi)
Rear
210 kPa (2.1 bar, 30 psi)
*1
/
230 kPa (2.3 bar, 33 psi)
*2
330 kPa (3.3 bar, 48 psi)
*1
/
350 kPa (3.5 bar, 51 psi)
*2
1 person's weight: About 75 kg
*
1 2WD
*
2 4WD
(SKYACTIV-D 1.5)
Tyre size
Inflation pressure
Up to 3 persons ―Full load
215/60R16 95V
Front 250 kPa (2.5 bar, 36 psi) 260 kPa (2.6 bar, 38 psi)
Rear 230 kPa (2.3 bar, 33 psi) 330 kPa (3.3 bar, 48 psi)
215/50R18 92V
Front 250 kPa (2.5 bar, 36 psi) 260 kPa (2.6 bar, 38 psi)
Rear 230 kPa (2.3 bar, 33 psi) 330 kPa (3.3 bar, 48 psi)
1 person's weight: About 75 kg
Specifications
Specifications
9-10
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52