▼
Lane Departure Warning
If the system determines that the vehicle may deviate from its lane, the lane departure
warning (beep sound, rumble sound
*1
, or steering wheel vibration) is activated and the
direction in which the system determines that the vehicle may deviate is indicated in the
multi-information display and the active driving display.
If the system determines that the vehicle may deviate from its lane, the color of the lane line
on the side being detected by the system changes from white to amber, and flashes.
Multi-information Display Active Driving Display
NOTE
•
If you have set the lane departure warning sound to the beep sound/rumble sound
*1
setting, the warning sound may not be heard depending on the surrounding noise
conditions.
•
If you have set the lane departure warning system to the steering wheel vibrations setting,
the vibration may not be felt depending on the road surface conditions.
•
When the setting for the steering operation assist is changed to operational, the warnings
can be set to activate/not activate. (When the setting for the steering operation assist is
changed to non-operational, the warnings cannot be set to not activate.)
Refer to Setting Change (Personalization Features) on page 9-11.
•
The LAS&LDWS can be changed to the following settings regardless of whether the
steering operation assist has been set to operational/non-operational. Always check the
setting status when driving the vehicle and make setting changes if necessary.
Refer to Setting Change (Personalization Features) on page 9-11.
•
Steering wheel vibration: Strong/weak
•
Warning sound volume
•
Types of warnings (steering wheel vibration/beep sound/rumble sound
*1
)
When Driving
i-ACTIVSENSE
4-141
CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27
To Next Page
