Engine Oil
NOTE
Changing the engine oil should be
performed by an Authorized Mazda
Dealer.
Refer to Introduction (page 6-2) for
owner's responsibility in protecting your
investment.
▼
Recommended Oil
U.S.A. and CANADA
SKYACTIV-G 2.0, SKYACTIV-G 2.5
Use SAE 0W-20 engine oil.
Mazda Genuine Oil is used in your Mazda
vehicle. Mazda Genuine 0W-20 Oil is
required to achieve optimum fuel
economy.
For maintenance service, Mazda
recommends Mazda Genuine Parts and
Castrol
®
(U.S.A. only).
(ILSAC)
Only use SAE 0W-20 oil “Certified For
Gasoline Engines” by the American
Petroleum Institute (API).
Oil with this trademark symbol conforms
to the current engine and emission system
protection standards and fuel economy
requirements of the International
Lubricant Standardization and Approval
Committee (ILSAC), comprised of U.S.
and Japanese automobile manufacturers.
80
60
40
20
0
–40 –20
30
100
40
20
10
0
–10
–20
–30
–40
SKYACTIV-D 2.2
Use SAE 0W-30 engine oil.
Mazda Genuine Oil is used in your Mazda
vehicle and is the recommended 0W-30
lubricant. Mazda Genuine 0W-30 Oil is
required to achieve optimum fuel
economy and durability for the Diesel
Particulate Filter. If Mazda Genuine
0W-30 Oil is not available, ACEA C3
0W-30 may be used for oil level
maintenance and oil changes however, it
must be replaced with Mazda Genuine
0W-30 at the next oil change to maintain
optimum performance.
Maintenance and Care
Owner Maintenance
6-24
CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27
To Next Page
