2. Turn the audio control dial and select a
desired mode.
Display Mode Function
PAIR DE-
VICE
Pairing mode
Bluetooth
®
audio de-
vice pairing
LINK
CHANGE
Link change
mode
Changing link to Blue-
tooth
®
audio device
PAIR DE-
LETE
Pairing dele-
tion mode
Deleting link to Blue-
tooth
®
audio device
DEVICE
INFO
Device infor-
mation dis-
play mode
Displaying vehicle's
Bluetooth
®
unit infor-
mation
3. Press the audio control dial to
determine the mode.
▼
Bluetooth
®
audio device pairing
(Bluetooth
®
Audio)
Any Bluetooth
®
audio device must be
paired to the vehicle's Bluetooth
®
unit
before it can be listened to over the
vehicle's speakers.
A maximum of seven devices including
Bluetooth
®
audio devices and hands-free
mobile phones can be paired to one
vehicle.
NOTE
•
If a Bluetooth
®
device has already been
paired to the vehicle as a hands-free
mobile phone, it does not need to be
paired again when using the device as a
Bluetooth
®
audio device. Conversely, it
does not need to be paired again as a
hands-free mobile phone if it has
already been paired as a Bluetooth
®
audio device.
•
Device registration can also be done
using voice recognition.
Concerning the operation of a Bluetooth
®
audio device itself, refer to its instruction
manual.
Some Bluetooth
®
audio devices have PIN
codes (four digits). Refer to the audio
device's instruction manual because the
pairing procedure differs depending on
whether it has a PIN code or not.
Pairing a Bluetooth
®
audio device
which has a four-digit PIN code
1. Using the audio control dial, select the
pairing mode “PAIR DEVICE” in the
“BT SETUP” mode. (Refer to
“Bluetooth
®
audio device set-up” for
details.)
2. Press the audio control dial to
determine the mode. After “ENTER
PIN” is displayed on the audio display
for three seconds, “PIN 0000” is
displayed and the PIN code can be
input.
Interior Features
Audio Set [Type A (non-touchscreen)]
5-40
CX-5_8GB6-EA-17G_Edition1 2017-5-18 10:43:27
To Next Page
Loading...
