5. As the Bluetooth
®
audio device
requires a PIN code, input “0000”.
6. When the pairing is completed, “
”
and “PAIR SUCCESS” are displayed
after about 10-30 seconds, after which
“PAIR SUCCESS” continues to be
displayed for three seconds, and then
the unit returns to the normal display.
NOTE
l
If pairing cannot be completed, try
“1234” instead. Refer to the owner's
manual of your mobile device for the
right PIN code.
l
Some Bluetooth
®
audio devices need
a certain amount of time before the
“
” symbol is displayed.
l
If the pairing failed, “Err” flashes for
three seconds.
l
Pairing cannot be performed while
the vehicle is moving. If you attempt
to perform pairing whi le the vehicle
is moving, “PAIR DISABLE” is
displayed.
l
If seven Bluetooth
®
audio devices
have already been paired to the
vehicle, pairing cannot be performed
and “MEMORY FULL” is
displayed. Delete one paired device
to pair another one.
Device selection
If several devices have been paired, the
Bluetooth
®
unit links the device last
paired. If you would like to link a
different paired device, it is necessary to
change the link. The order of device
priority after the link has been changed is
maintained even when the ignition is
switched off.
1. Using the audio control dial, select the
link change mode “LINK CHANGE”
in the “BT SETUP” mode. (Refer to
“Bluetooth
®
audio device set-up” for
details.)
2. Press the audio control dial to
determine the mode.
3. The name of the currently linked
Bluetooth
®
audio device is displayed.
If no Bluetooth
®
audio device is
currently linked, the name of the first
device among the paired devices is
displayed.
5-100
Interior Features
Bluetooth®
To Next Page
