119
Before
Use
Getting
started
Routing
Address
Book
Voice
Recognition
Navigation
Set Up
Bluetooth Hands-Free
Note
lIf the ignition switch is turned off during a hands-free call, the line is transferred to the
mobile telephone automatically.
lIf the mobile telephone is in a location where radio reception is difficult such as a metal
container or in the trunk, the call may not be connected using Bluetooth. If communication is
not possible, change the location of the mobile telephone.
n Mobile telephone pairing
To use Bluetooth Hands-Free, the phone has to be paired to the hands-free unit using the following procedure.
A maximum of seven devices including hands-free mobile phones and Bluetooth audio
devices can be paired to one vehicle.
1. Press the MENU button.
2. The NAVIGATION MENU is displayed.
Press the on-
screen.
*: For a first-time pairing of a hands-free mobile
phone, follow the procedure in Step 6. For a
subsequent or later hands-free mobile
phone, follow the procedure in Step 3.
3. Press the on-screen button.
4. Press the on-
screen button.
5. Press the on-screen button.
6. A “Pairing is in progress. Please start pairing
procedure on your Bluetooth device.”
message with a PIN number is displayed.
*: Set the PIN code using the hands-free mobile
phone. Refer to the instruction manual
accompanying each Bluetooth device for details.
7. If the pairing is successful, the Bluetooth
device name is displayed with a message
“PAIRING COMPLETE”.
To Next Page
Loading...
Need help?
General
