ENGLISH
Instruction manual
coffee grinder
Philos
Contents
ENGLISH.....................................................................8
1. GENERAL DESCRIPTION........................................8
2. FOREWORD............................................................8
3. WARNINGS REGARDING SAFETY..........................8
4. INSTALLATION AND WIRING.................................10
5. WARNING REGARDING OPERATION...................11
6. OPERATION..........................................................11
6.1. Preliminaries.........................................................11
6.2. Switching the appliance on and off.........................11
6.3. Adjusting grinding.................................................11
7. CLEANING.............................................................11
7.1. General cleaning..................................................12
7.2. Clean the outlet duct for ground coffe.....................12
7.3. Hopper and canister cleaning................................12
7.4. Grinding system cleaning......................................12
8. MAINTENANCE......................................................12
8.1. Adjustment disk zeroing........................................12
8.2. Stepped to Stepless conversion.............................12
8.3. Noise level...........................................................12
8.4. Safety devices......................................................12
9. DISPOSAL..............................................................13
10. EC DECLARATION OF CONFORMITY ................14
1. GENERAL DESCRIPTION
See illustrations page.
1- hopper lid;
2- hopper (coffee bean container);
3- front cover;
4- duct knocker;
5- outlet duct for ground coffee;
6- canister stop;
7- locking slide;
8- grinding adjustment disk;
9- main switch;
10- canister;
11- duct cleaning tool;
12- cleaning brush;
13- technical data label;
B1- back base cover;
B2- power cord;
B3- pin for back base cover;
F1- grinding adjustment index;
F2- finer adjustment direction;
F3- coarser adjustment direction;
H1- duct cleaning tool housing;
I1- pins for blade holder assembly;
I2- blade holder assembly;
I3- mating surface for blade holder ;
J1- inner gear;
J2- calibration block;
K1- screws for inner gear;
L1- spring plungers;
M1- microswitch.
Dimensions (W x H x D) and Weight:
153 x 361 x 351 mm / 12.5 kg
6 x 14¼ x 14 in / 27,6 lb
2. FOREWORD
Read this manual from cover to cover
before using the appliance as it
contains important instructions for the
safety, operation and maintenance of
the appliance.
Look after this manual and keep it in
a safe place.
The manufacturer reserves the right
to make changes to the product and
to the manual.
Original instructions. All right
reserved. It is prohibited to reproduce,
adapt or translate this document
without prior written authorization.
3. WARNINGS REGARDING
SAFETY
This appliance is intended to be
used in household and similar
applications such as: staff kitchen
areas in shops, offices and other
working environments, farm
houses, by clients in hotels,
motels and other residential type
environments,bed and breakfast
type environments.
8
To Next Page
Loading...
