resulting from overcurrents by a thermal overload
protection which, when tripped, cuts off the power supply
to the motor.Should the protection trip as a result of
anomalous operation, such as the grinding blades
jamming, the appliance must be turned off using the on-off
switch, unplugged from the mains, and skilled technical
personnel contacted. Never perform any work on the
appliance while it is attached to the mains, to avoid the risk
that motor turns on suddenly. If the appliance overheats
as a result of the motor stopping, allow the appliance to
cool down before performing any repair work.
Microswitch
The system that protects against accidental contact with
the rotating parts of the grinding system consists of a
microswitch, situated under the body of the appliance, that
cuts the electricity to the motor [Figure M].
9. DISPOSAL
Do not litter: dispose of the packaging materials according
to the laws in force.
Should you decide not to use the appliance any more,
remember to unplug it so that it cannot be used, and then
cut the cable in the point where it comes out of the
appliance.
Contact specialized firms for information on the disposal of
the components of the appliance.
INFORMATION FOR USERS RESIDING IN THE
EUROPEAN UNION
Pursuant to art. 26 of Legislative Decree of March 14,
2014, no. 49: “Implementation of Directive 2012/19/EU on
Waste Electrical and Electronic Equipment (WEEE)” .
The crossed bin symbol shown here and on the
equipment or its box indicates that, at the end of its useful
life, the product (EEE) must be collected separately from
other waste, with prohibition of disposal with mixed waste.
For more information, visit www.mazzer.com.
13
To Next Page
Loading...
