EN
25
"white/red/white/white"
Error 4 [0100], version with charging
socket only
The charging cable plug could not be locked:
Disconnect the charging cable plug and
reconnect it quickly, have it checked at the
workshop if necessary.
"white/red/white/red"
Error 5 [0101]
The Wallbox has not detected an electric
or plug-in hybrid vehicle, but instead an
unauthorised load:
Only electric vehicles which comply with
the standard may be charged. Remove the
unauthorised load and restart the charging
process.
"red/white/white/white"
Error 8 [1000]
The charging cable plug on the Wallbox is
emitting an invalid state:
Cable hardware error – disconnect the charging
cable plug and reconnect properly, if necessary
replace the cable.
Errors on the power unit (displayed in red and blue)
"blue/blue/blue/red"
Error 8001 [0001]
The charging voltage cannot be switched on;
internal error or hardware defective:
Reconnect the vehicle or restart the Wallbox.
If the error occurs again, contact your service
outlet.
To Next Page
Loading...