EasyManua.ls Logo

McConnel RoboCut - Machine Delivery

McConnel RoboCut
130 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
MACHINE DELIVERY
The machine will be delivered ready for use having been pre-filled with all necessary lubricants
and fluids other than fuel.
Before use all packaging must be removed and the transport fasteners loosened.
The reception antenna will be supplied as a loose item and must be screwed onto the machines
receiver prior to use.
The standard items supplied will be as follows:
Standard Equipment
Machine with Mounted Receiver
Transmitter and Battery Pack
Reserve Battery Pack
Battery Charger 12V CA
Antenna
Belt for the Radio Control
Ignition Key
Use and Maintenance Manual for Machine
Use and Maintenance Manual for Transmitter
Use and Maintenance Manual for Engine
Machine Lifting Points
The photos below shown the machine’s lifting points; the lifting eyes are located at each end of
the track plates on both sides of the machine. The positions of the lifting points enable the
machine to be safely raised using suitable overhead lifting equipment.
Note: All equipment used to raise the machine must have a SWL in excess of the total weight of the
machine – keep all persons at a safe distance from the machine during the lifting procedure.

Related product manuals