25
OPERATION
Always wear safety shoes, ear defenders and safety glasses when
operating the machine.
Always work in good lighting conditions. If necessary, use artificial lighting in
compliance with local rules in force.
Do not smoke near the machine; oils, fuels and lubricants are flammable.
Before moving the machine, ensure that there are no persons, animals, or obstacles in the work
zone.
Do not change direction whilst moving on kerbs, rocks or
surfaces with considerable differences in height (more than
20cm); in these instances always move perpendicular to the
obstacles.
When reversing uphill, do not steer when transferring from the
level surface to the slope, if this is unavoidable, perform the
manoeuvre gradually.
Do not move along the edge of a slope or on uneven ground with
one track in the horizontal position and the other inclined or
partially raised (when machine is inclined in excess of 10°).
To avoid risk of track damage, always proceed with both tracks
travelling on the same horizontal plane.
When the machine manoeuvres over an obstacle, a space is
created between the bearing rollers and the track - this can
cause the track to come off its seat. The same situation can
occur in reverse when a space is created between bearing roller,
idler roller, and track. To eliminate this risk, track guides are
provided on the front part of the undercarriage.
To Next Page
Loading...
