14
Alarm
In the case of a failure or malfunction the screen will
display ‘Alarm’ and a numeric error code to identify the
component that has malfunctioned.
Refer to the chart below for identification of the source
of the fault and report it to McConnel Service if the
problem persists.
Error Code Cause
Set 4 + number Error / Failure - Display
Set 6 + number Error / Failure - Remote Control Communication
Set 7 + number Error / Failure - Joystick
Set 9 + number Error / Failure - Level Sensor
Set 50 + number Error / Failure - Output CPU
To Next Page
Loading...
