McGuire MP Series - Safety; Recognize Safety Information; General Operational Safety Precautions

1
Manual No. 4111-0019
May 2015
July 2016
SAFETY
Do not start the equipment until all unauthorized
personnel in the area have been warned and have
moved outside the operating zone.
Remove any tools or foreign objects from the
operating zone before starting.
Keep the operating zone free of obstacles that could
cause a person to trip or fall.
Recognize Safety Information
The use of the word DANGER signifies the presence
of an extreme hazard or unsafe practice which will
result in death or serious injury.
Safety-Alert Symbol
The Safety- Alert Symbol is a graphic representation
intended to convey a safety message without the
use of words. When you see this symbol, be alert to
the possibility of death or serious injury. Follow the
instructions in the safety message panel.
The use of the word WARNING signifies the
presence of a serious hazard or unsafe practice
which could result in death or serious injury.
NOTICE is used to address practices not related to
physical injury.
The use of the word CAUTION signifies possible
hazard or unsafe practice which could result in
minor or moderate injury.
Safety instruction(or equivalent) signs indicate
specific safety-related instructions or procedures.
General Operational Safety
Precautions
Read and understand the Owner’s/User’s Manual and
become thoroughly familiar with the equipment and its
controls before operating the transport vehicle restraint.
Never operate a transport vehicle restraint while a
safety device or guard is removed or disconnected.
Never remove DANGER, WARNING, or CAUTION
signs, Placards or Decal’s on the equipment unless
replacing them.
O
p
e
r
a
t
i
n
g
Z
o
n
e
O
p
e
r
a
t
i
n
g
Z
o
n
e