MC275
REPACKING INSTRUCTIONS
31
In the event it is necessary to repack the
equipment for shipment, the equipment must be
packed exactly as shown below. It is important that
the four plastic feet are attached to the bottom of
the equipment.
Use the original shipping carton and interior
parts only if they are all in good serviceable con-
dition. If a shipping carton or any of the interior
part(s) are needed, please call or write Customer
Service Department of McIntosh Laboratory.
Please see the Part List for the correct part num-
bers.
SHIPPING
CARTON
FOAM PAD
BOTTOM
TUBE COVER
WITH TUBE
FOAM INSERT
INSIDE TO
PROTECT THE
TUBES
POLY BAG
FOAM PAD
TOP
UNIT WITH
(4) FEET ON
BOTTOM
COVER
WARNING
SHEET
Quantity Part Number Description
1 034529 Shipping carton
1 034526 Foam Pad Top
2 034527 Foam Pad Bottom
1 034528 Foam Insert (for protecting
the Tubes during shipping)
1 041314 Warning Sheet
4 400131 10-32 x 1/2 inch screw
4 163073 Feet
To Next Page
Loading...
