MS300 Advanced Users Guide
3/3/2005
Page 39 of 65
2 Chambers Street • Binghamton, NY 13903-269 Phone: 607-723-3512 / 800-538-6576 • Fax: 607-724-0549
Technical Support 866-458-6910 9:00AM to 6:00PM EST, M-F www.mcintoshlabs.com
Keyboard Programming
The MS300 includes a wireless IR keyboard with universal remote control capabilities.
The keyboard can be programmed to operate one MS300 Music Server and three other
devices.
Only the MS300 source button (the one with the swoop) can be programmed to
operate the MS300. The three source buttons on the remote labeled TV, RCV, and DVD
can be programmed to operate other devices.
Programming the Keyboard to Control MS1, MS2, MS3, or MS4
Sources
Swoop
Button
The MS300 (swoop) source button is preprogrammed at the factory to correspond to the
MS1 button on the remote. The MS300 source button can be programmed to correspond
to any of the MS source buttons.
Follow these steps to program the keyboard to control any of the 4 MS IR code banks:
1. Press Swoop
2. Press & Hold the “Set” button on the keyboard until the LED flashes twice.
To Next Page
Loading...
