MS300 Advanced Users Guide
3/3/2005
Page 6 of 65
2 Chambers Street • Binghamton, NY 13903-269 Phone: 607-723-3512 / 800-538-6576 • Fax: 607-724-0549
Technical Support 866-458-6910 9:00AM to 6:00PM EST, M-F www.mcintoshlabs.com
Video Outputs
The MS300 has several video output formats and connectors including:
• 2 S-Video
• 2 Composite Video
• 1 Component Video (480i interlaced standard definition)
MS300 Video Output Connectors
All video outputs are active at the same time, so you can use as many as you like without
causing signal degradation.
The Component Video output will provide the best possible video quality for the MS300
User Interface, but will require that your video system has an available component input.
The MS300 user interface is 720x480 (480i) and will appear stretched horizontally on a
16x9 display. If your display has the option to select different resolutions for each input,
you can select another viewing resolution which eliminates the horizontal distortion.
One of the S-Video outputs is typically used for an optional third party touch panel to
provide the user interface directly on the touch panel. The other S-Video output can be
used if the installation has an available S-Video input or for a distributed multi-room
installation.
To Next Page
Loading...
