MS300 Advanced Users Guide
3/3/2005
Page 41 of 65
2 Chambers Street • Binghamton, NY 13903-269 Phone: 607-723-3512 / 800-538-6576 • Fax: 607-724-0549
Technical Support 866-458-6910 9:00AM to 6:00PM EST, M-F www.mcintoshlabs.com
Programming the Universal Source Buttons
Use the following steps to program the AUX, DVD, TV, and RCV source buttons to
control other devices. The following table indicates which device types can be
programmed on which source buttons:
Source Button Device Assignment
TV TV
CBL NOT AVAILABLE
RCV Amplifier, Tuner, Phono, Misc. Audio, CD, Home Automation, MD
DVD VCR, Audio Cassette, DVD, LDP, DAT, PVR
Locate the 4 digit device code for the device you want to control in Appendix A.
Press the source button to be programmed.
Press & Hold the “Code Set” button on the remote until the LED flashes twice.
Enter the 4 digit code using the remote’s numeric keypad. The LED will flash
twice indicating the code was accepted.
Note: If the LED does a single long flash then the entered code was not valid for that
source button.
See Appendix B for details and instructions for accessing the other various functions
available on the remote control.
To Next Page
Loading...
